Good battery maintenance can not only improve the service life of the battery but also save costs and avoid the time waste of changing the battery frequently. In the face of high temperatures.
Under the test of climate, the maintenance of forklift batteries is particularly important, because they will also face the trouble of filling "water".
In the process of charging and discharging and storage of forklift batteries, part of the water will evaporate because of the use environment and internal high-temperature reaction, resulting in the battery water shortage. If you do not add water to the battery in time, the service life of the forklift battery in a state of long-term water shortage will be affected.
Check the battery water shortage periodically. It is recommended to check the battery water shortage once a month to replenish water for the battery in time.
So when checking the battery level, how to judge the battery water shortage?
At present, there are three types of liquid injection caps on the market: ordinary flower basket type liquid injection cap, buoy type liquid injection cap, and automatic water filling system liquid injection cap. Different liquid injection caps have different water filling methods and liquid level standards. The normal liquid level range of forklift batteries is shown as follows:
When the battery liquid level is lower than the lowest liquid level, you need to refill water to the battery level between the highest and lowest liquid levels.
Secondly, when filling the "water" for the forklift battery, we need to pay attention to the following matters:
◆ Use special battery distilled water, unqualified distilled water say No! Formal channels to buy security.
◆ Water should adhere to the principle of a small number of times, it is strictly prohibited to add too much water. Battery water is mildly corrosive, and overflow may corrode the battery case and cause perforation.
◆ Add water at the end of the charge (usually one hour before the end of the charge). Do not add water to the battery.
◆ The liquid injection plug can not be forgotten. After adding water, cover the liquid injection plug to prevent impurities from entering the battery and causing a short circuit to the battery plate, shortening the battery life.
